Standard Technical Specifications
Viton Bonnet / Viton Gate Seals
HV: Viton® elastomer
Bakeout Temperature
Elastomer sealed bonnet: 150°C
Actuator
- Manual: 60°C
- Pneumatic: 60°C
Mounting Position
Any
Cycles Until Service
100,000 cycles
Vacuum
Pressure Range
- HV: 1x10-9 mbar
Helium leak rate: <2x10-9 mbar l/s
Differential pressure closed: 1 bar in either direction
Maximum Δ pressure before opening: <30 mbar
Mechanism
Pneumatic air service: 80 psig
Solenoid: 4.0 Watts
- supplied voltage: 120V AC, 50/60 Hz
- optional voltages: 24, 200, 240 VAC 50/60 Hz or 12, 24V DC
Position indicator, max: 115 VAC or 28 VDC, 20 mA
Use the table below to obtain 2D drawings (PDF) and 3D drawings (STP), or to request a quote.
If you need help finding a model number use the following the link: 11000 Series Model Key Guide
DN | Model Number | KF/ISO-F 3 (Bolted) | ISO-K 6 (Clamped) | CF-F 0 or 4 (Conflat) | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
mm | inch | ||||||||||
16 | 0.625 | 11212-006_ | 2D | 3D | Quote | – | – | – | 2D | 3D | Quote |
40 | 1.50 | 11212-015_R | 2D | 3D | Quote | – | – | – | 2D | 3D | Quote |
50 | 2.00 | 11212-020_R | 2D | 3D | Quote | – | – | – | 2D | 3D | Quote |
63 | 2.50 | 11212-025_R | 2D | 3D | Quote | 2D | 3D | Quote | 2D | 3D | Quote |
80 | 3.00 | 11212-030_R | 2D | 3D | Quote | 2D | 3D | Quote | 2D | 3D | Quote |
100 | 4.00 | 11212-040_R | 2D | 3D | Quote | 2D | 3D | Quote | 2D | 3D | Quote |
160 | 6.00 | 11212-060_R | 2D | 3D | Quote | 2D | 3D | Quote | 2D | 3D | Quote |
200 | 8.00 | 11212-080_R | 2D | 3D | Quote | 2D | 3D | Quote | 2D | 3D | Quote |
250 | 10.00 | 11212-100_R | 2D | 3D | Quote | – | – | – | 2D | 3D | Quote |
320 | 12.00 | 11212-120_R | 2D | 3D | Quote | – | – | – | 2D | 3D | Quote |
350 | 14.00 | 11212-140_R | – | – | – | – | – | – | 2D | 3D | Quote |
400 | 16.00 | 11212-160_R | 2D | 3D | Quote | – | – | – | – | – | – |
500 | 20.00 | 11212-200_R | 2D | 3D | Quote | – | – | – | – | – | – |
600 | 24.00 | 11212-240_R | 2D | 3D | Quote | – | – | – | – | – | – |
Flange Types
- 0 = CF-F Port with UNF Thread (11212-0400R)
- 3 = KF/ISO-F Bolted (11212-0403R)
- 4 = CF-F Port with Metric Thread (11212-0404R)
- 6 = ISO-K Clamped (11212-0406R)
Options
- Custom flanges
- Alternate o-ring material
- Alternate solenoid voltages
- Microswitches for position indicators
- Roughing ports
- Motor operators
- Spring loaded: Air-to-open, Spring-to-close on sizes up to 3-inches [75-mm]
- High temperature components including o-rings, microswitches and actuators
- Larger Sizes